Sort by:
136 products
136 products
Built for Control. Designed for Protection.
The PERST-4 Diffuser Cover provides both lens protection and controlled beam diffusion for PERST-4 laser units. Designed to shield the exposed laser glass while softening the output of powerful visible and IR lasers, it helps reduce laser bloom and create a more flood-like illumination pattern.
By diffusing the laser output, the PERST-4 Diffuser Cover spreads energy over a wider area, making the beam less intense and more usable at close to mid-range distances. This can improve situational awareness and reduce excessive splashback when operating in confined or reflective environments.
Manufactured from durable polymer, the PERST-4 Diffuser Cover maintains a low-profile footprint while delivering dependable protection and consistent diffusion performance in demanding conditions.
Key Features:
-
Integrated Diffusion Layer
Softens visible and IR laser output to reduce bloom and produce a wider, more flood-like pattern. -
Protective Lens Shield
Adds a sacrificial barrier to help protect the PERST-4 laser glass from impacts and debris. -
Low-Profile Design
Maintains the original footprint of the laser unit without interfering with mounting or operation. -
Secure Fitment
Designed specifically for PERST-4 units to ensure consistent retention during use. -
Lightweight Construction
Adds minimal weight while enhancing overall durability.
Notes / Disclaimer:
Laser diffusion characteristics may vary based on environment, distance, and laser settings. This product is designed to reduce bloom and protect the lens but does not eliminate all laser splash or guarantee protection from all impacts. Cosmetic wear or damage may occur during normal use.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Built for Protection. Designed for Use.
The PERST-4 Glass Cover is designed to provide an added layer of protection for the exposed laser glass on PERST-4 units. Shielding the front lens from direct impacts, debris, and environmental hazards, it helps reduce the risk of damage during handling, transport, and use.
Engineered to fit securely over the PERST-4 laser housing, the cover acts as a sacrificial barrier, absorbing minor impacts and abrasions that could otherwise compromise the laser glass. Whether used on a duty setup, training rifle, or range gun, it adds peace of mind without interfering with function or footprint.
Manufactured from durable polymer, the PERST-4 Glass Cover maintains a low-profile form while providing dependable protection in demanding environments.
Key Features
-
Protective Lens Shield
Adds a physical barrier to help protect the PERST-4 laser glass from impacts and debris. -
Low-Profile Design
Maintains the original footprint of the laser unit without obstructing use or mounting. -
Secure Fitment
Designed specifically for PERST-4 units to ensure consistent retention during use. -
Lightweight Construction
Adds minimal weight while enhancing overall durability.
Notes / Disclaimer:
This product is designed to help reduce the likelihood of damage, but it does not guarantee protection from all impacts or misuse. Cosmetic wear or damage may occur during normal use.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Customize your PMAGs with precision and consistency. This dual-sided jig aligns both sides of your PMAG for clean, repeatable laser stippling or engraving in a single setup.
Engineered to hold your magazine perfectly parallel to the laser, it prevents misalignment and protects non-target areas from laser bleed with surrounding material.
Key Features:
-
Dual-Side Setup – Engrave both sides at once for faster, consistent results.
-
Laser Control – Extra material blocks bleed, protecting edges and base.
-
Precision Alignment – Holds PMAG level with the laser for clean, accurate work.
Compatibility:
-
Fits PMAG bases with M6 SHCS and 25mm on-center spacing.
Note:
Always follow proper safety procedures when using laser equipment.
MADE IN THE USA.
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.
The Lupus 9 Labs Killflash is a precision-engineered anti-reflection device (ARD) designed to press-fit directly into your scope’s bezel that requires no adhesives, no fasteners, and no fuss. Built to eliminate lens glare and reduce your visual signature, the Killflash provides critical concealment without compromising optical clarity downrange.
Its honeycomb mesh geometry is optimized for maximum light transmission while still breaking up telltale reflections. Once installed, it sits flush with your optic for a clean, low-profile appearance.
The killflash is also available with a compatible Scope Cap. This rugged, press-on cover shields your lens and the ARD beneath it from dirt, debris, and reflective surfaces when not in use. The flipper tab allows for quick, hinge-free deployment in the field.
Features:
-
Tool-Free Press-Fit Design – Installs securely without hardware
-
Signature Reduction – Disrupts glare without sacrificing visibility
-
Flush, Low-Profile Fit – Minimalist integration with your optic
-
Optional Scope Cap – Adds lens protection and full concealment when inactive
-
Rugged and Field-Ready – Designed to perform in the harshest conditions
The Lupus 9 Labs Killflash is a precision-engineered anti-reflection device (ARD) designed to press-fit directly into your scope’s bezel that requires no adhesives, no fasteners, and no fuss. Built to eliminate lens glare and reduce your visual signature, the Killflash provides critical concealment without affecting optic clarity downrange.
Its honeycomb mesh geometry is optimized for maximum light transmission while still breaking up reflections that could give away your position. Once installed, it sits flush with the optic body, blending into your platform with a sleek, low-profile finish.
Features:
-
Tool-Free Press-Fit Design – Installs securely in seconds
-
Signature Reduction – Eliminates lens glare without impacting clarity
-
Low-Profile Appearance – Sits flush with the scope for a streamlined look
-
Durable Construction – Built for real-world use
MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.
The Lupus 9 Labs Pro ARD + Scope Cap system is a rugged, field-ready solution for LPVO scopes—offering effective lens protection and signature reduction in one streamlined package. Built from carbon fiber reinforced PETG, this setup is engineered for durability under real-world conditions.
The Pro ARD minimizes glare from sunlight and artificial light while helping conceal your position. It installs using the included shockcord—no tools, no adhesives, just a secure, minimalist fit. The ARD sits low to the bezel and flips off easily when needed for quick lens access or cleaning.
Paired with the elastic Scope Cap, this system shields your optic from dust, debris, and reflections while maintaining a sleek, ultra-low-profile. Together, they deliver reliable lens protection and optical clarity without adding bulk.
Features:
-
Designed for LPVO scopes
-
Carbon Fiber Reinforced PETG – Built to endure real-world use
-
Dual-System Protection – Pro ARD and Scope Cap work together for complete coverage
-
Signature Reduction – Pro ARD breaks up reflections from sun and artificial light
-
Quick Flip-Off ARD – Low-profile and easy to remove for cleaning or access
-
Shockcord Installation – Simple, secure fit without tools or fasteners
-
Minimalist Scope Cap – Protects lens and reduces reflective surfaces
-
Ultra-Low Profile – Reduces interference and bulk in the field
MADE IN THE USA.
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.
Our Scope Caps are rugged, ultra-low-profile lens covers designed to protect your optic and the killflash beneath it when not in use. Engineered for real-world use, they guard against dust, debris, and reflections, keeping your glass clean and your signature hidden.
With a minimalist flipper tab for fast, intuitive removal, these caps eliminate bulky hinges and moving parts. Whether flipped up to take a shot or flipped down for maximum concealment, our Scope Caps stay out of the way and out of sight.
When paired with a Lupus 9 Labs Killflash, this system becomes a complete optical signature control solution. Lightweight, streamlined, and built for purpose.
Features:
-
Low-Profile Design – Sits tight to your optic with zero unnecessary bulk
-
Integrated Flipper Tab – Quick, intuitive removal without moving parts
-
Killflash-Ready – Built to cap over Lupus 9 Labs Killflash inserts
-
Signature Reduction – No reflective surfaces; optimized for stealth
-
Mission-Focused Durability – Designed for the field, not the bench
MADE IN THE USA.
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.
Trijicon SRO/RMR HD Optic Maintenance Tool (Battery Cap, Windage, & Elevation)
$9.00
Unit price perTrijicon SRO/RMR HD Optic Maintenance Tool (Battery Cap, Windage, & Elevation)
$9.00
Unit price perEnsure safe and hassle-free maintenance of your Trijicon SRO or RMR HD optic with our precision-engineered Optic Maintenance Tool. Designed to prevent scratches or damage during battery cap removal, this tool also doubles as an adjustment aid for windage and elevation, making it an essential accessory for your optic.
Key Features:
-
Protective Design – Prevents scratches and damage to your optic’s housing while removing the battery cap.
-
Ergonomic Grip – Ensures a secure, slip-resistant hold for effortless maintenance.
-
Multi-Functionality – The handle shape allows for precise windage and elevation adjustments without additional tools.
Upgrade your maintenance routine with a tool designed for precision, protection, and convenience!
MADE IN THE USA.
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.
This purpose-built tool is CNC machined for a precise fit with URX II, URX 3, URX 3.1, and 11-tooth barrel nuts commonly associated with a certain well-known manufacturer (if you know, you know). Made in the USA, it’s engineered for professional use in demanding setups.
Constructed from 7075 aerospace-grade aluminum, this wrench is designed to prevent marring OEM barrel nuts while remaining exceptionally strong and lightweight. It features an open-ended design, allowing for convenient installation and removal without disassembling your muzzle device or gas block—even if your muzzle device is pinned and welded.
Finished in H-Series Cerakote Graphite Black, it offers excellent abrasion resistance, corrosion protection, and a clean, professional look.
Key Features
-
CNC-Machined Precision – Designed for an exact, secure fit with URX-style systems
-
7075 Aluminum Construction – Aerospace-grade material prevents damage to aluminum barrel nuts while maintaining strength and durability
-
H-Series Graphite Black Cerakote Finish – Tough, corrosion-resistant coating for lasting use
-
Open-Ended Profile – No need to remove your muzzle device or gas block for access
-
System Compatibility – Fits URX II, URX 3, URX 3.1, and KAC-style 11-tooth barrel nuts
MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.
