Products

Purpose-built for the ADM UIC lower, this enhanced magwell is designed to increase reload speed and consistency without adding bulk or complexity. Its streamlined form expands the magwell funnel for smoother, more intuitive magazine insertion, especially under pressure. 

Key Features:

• Streamlined Profile – Low-profile, snag-free shape that stays clear of gear, gloves, and kit.

• Enhanced Funnel Geometry – Enlarges the magwell opening for faster, more forgiving reloads.

• Uninterrupted Handling – Contoured to support clean manipulations and transitions without interference.

• Minimal Hardware, Maximum Reliability – Installs with a single M2 screw and one M2 Nylock Nut (1.5 mm Allen wrench required) for a secure, no-fuss setup.

Variant Options:

Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.

Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.

Installation Notice

• Secure the screw until the clamping section begins to close, then apply a small final adjustment.

• Do not overtighten. Excess torque may deform or damage the magwell.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

This magwell is purpose-engineered for the Aero Precision M4E1 lower. Its compact form increases the magwell funnel size for smoother, vacuum-like reloads while adding no unnecessary bulk or complexity. Designed to stay out of your way, it supports fast reloads and clean manipulations without interfering with your manual of arms. 

Key Features:

• Streamlined Profile – Compact, smooth-edged design that won’t catch on gear, gloves, or kit.

• Enhanced Funnel Size – Expands the magwell opening for vacuum-like reloads and faster magazine insertion.

• Uninterrupted Handling – Contoured to avoid interference during reloads, manipulations, and transitions.

• Minimal Hardware, Maximum Reliability – Uses a single M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.

Installation Notice:

• Secure the screw until the clamping section begins to close, then apply a small final adjustment.

• Do not overtighten. Excess torque may deform or damage the magwell.

MADE IN THE USA

BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Purpose-built for the Aero Precision M5 (.308) lower, this enhanced magwell is designed to increase reload speed and consistency without adding bulk or complexity. Its streamlined form expands the magwell funnel for smoother, more intuitive magazine insertion, especially under pressure. 

Key Features:

• Streamlined Profile – Low-profile, snag-free shape that stays clear of gear, gloves, and kit.

• Enhanced Funnel Geometry – Enlarges the magwell opening for faster, more forgiving reloads.

• Uninterrupted Handling – Contoured to support clean manipulations and transitions without interference.

• Minimal Hardware, Maximum Reliability – Installs with a single M2 screw and one M2 Nylock Nut (1.5 mm Allen wrench required) for a secure, no-fuss setup.

Variant Options:

Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.

Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.

Installation Notice

• Secure the screw until the clamping section begins to close, then apply a small final adjustment.

• Do not overtighten. Excess torque may deform or damage the magwell.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for speed and reliability, this magwell is purpose-engineered for the B&T Glock lower. Designed to enhance reload performance without adding bulk, it expands the magwell opening for smoother, faster, and more consistent magazine changes even under pressure.

Key Features:

• Streamlined Profile – Compact, smooth-edged form that won’t snag on gloves, gear, or kit.

• Enhanced Funnel Geometry – Enlarges the magwell opening for vacuum-like reloads and faster magazine alignment.

• Uninterrupted Handling – Contoured to stay out of your way during reloads, transitions, and manipulations.

• Simple, Secure Mounting – Installs using an underside-mounted M3 set screw pin for a tight, reliable hold.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for speed and reliability, this magwell is purpose-engineered for B&T factory magazine receivers, including the APC9, GHM9, and SPC9 platforms. Its compact form increases the magwell funnel size for smoother, vacuum-like reloads while adding no unnecessary bulk or complexity. Designed to stay out of your way, it supports fast reloads and clean manipulations without interfering with your manual of arms. 

Key Features:

• Streamlined Profile: Compact, smooth-edged design that won’t catch on gear, gloves, or kit.

• Enhanced Funnel Size: Expands the magwell opening for vacuum-like reloads and faster magazine insertion.

• Uninterrupted Handling: Contoured to avoid interference during reloads, manipulations, and transitions.

• Simple, Secure Mounting: Secures in place using an underside-mounted M3 set screw pin for a tight, reliable hold.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Purpose-built for GRIFFIN MK2 lowers, the GRIFFIN MK2 Magwell accelerates reloads and improves consistency without adding bulk or complexity. It's a clean, low-profile funnel that smooths magazine insertion for faster, more instinctive reloads, especially when time and movement matter. Whether at the range or in active use, the GRIFFIN MK2 Magwell keeps reloads quick, manipulations tidy, and your kit interference-free.

Key Features

• Low-Profile, Snag-Free Shape — Slim silhouette stays clear of gear, gloves, and kit.

• Optimized Funnel Geometry — Wider, forgiving entry for faster magazine seating under stress.

• Seamless Handling — Contoured to support smooth transitions and clean manipulations.

• Simple, Reliable Installation — Secures with one M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen) for a no-fuss fit.

Variant Options:

Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.

Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.

Installation Notice

• Secure the screw until the clamping section begins to close, then apply a small final adjustment.

• Do not overtighten. Excess torque may deform or damage the magwell.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Purpose-built for the LMT MARS-L lower, this enhanced magwell is designed to increase reload speed and consistency without adding bulk or complexity. Its streamlined form expands the magwell funnel for smoother, more intuitive magazine insertion, especially under pressure. Whether you're on the range or in the field, this magwell keeps your reloads fast, your manipulations clean, and your gear unobstructed.

Key Features:

• Streamlined Profile – Low-profile, snag-free shape that stays clear of gear, gloves, and kit.

• Enhanced Funnel Geometry – Enlarges the magwell opening for faster, more forgiving reloads.

• Uninterrupted Handling – Contoured to support clean manipulations and transitions without interference.

• Minimal Hardware, Maximum Reliability – Installs with a single M2 screw and one M2 Nylock Nut (1.5 mm Allen wrench required) for a secure, no-fuss setup.

Variant Options:

Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.

Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.

Installation Notice

• Secure the screw until the clamping section begins to close, then apply a small final adjustment.

• Do not overtighten. Excess torque may deform or damage the magwell.

MADE IN THE USA

BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for speed and reliability, this magwell is purpose-engineered for Milspec Forged lowers. Its compact form increases the magwell funnel size for smoother, vacuum-like reloads while adding no unnecessary bulk or complexity. Designed to stay out of your way, it supports fast reloads and clean manipulations without interfering with your manual of arms. 

Key Features:

• Streamlined Profile – Compact, smooth-edged design that won’t catch on gear, gloves, or kit.

• Enhanced Funnel Size – Expands the magwell opening for vacuum-like reloads and faster magazine insertion.

• Uninterrupted Handling – Contoured to avoid interference during reloads, manipulations, and transitions.

• Minimal Hardware, Maximum Reliability – Uses a single M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.

Variant Options:

Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.

Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.

Compatibility Note:
This magwell is compatible with standard Anderson Milspec Forged lowers. It has not been tested with other Milspec lowers. If you have different lower or special requirements, we’re happy to work with you to ensure a perfect fit.

Installation Notice:

• Secure the screw until the clamping section begins to close, then apply a small final adjustment.

• Do not overtighten. Excess torque may deform or damage the magwell.

MADE IN THE USA

BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Purpose-built for the MP5 platform, the MP5 Magwell accelerates reloads and improves consistency without adding bulk or unnecessary complexity. Designed as a clean, low-profile funnel, it smooths magazine insertion for faster, more instinctive reloads. Especially when time, movement, and efficiency matter.

Key Features:

• Low-Profile, Snag-Free Shape — Slim silhouette stays clear of gear, gloves, and kit.

• Optimized Funnel Geometry — Wider, forgiving entry for faster magazine seating under stress.

• Seamless Handling — Contoured to support smooth transitions and clean manipulations.

• Simple, Reliable Installation — Secures with one M2 screw (requires 1.5 mm Allen) for a no-fuss fit.

Compatibility Disclaimer

• Confirmed fit on HK MP5 variants, including the HK SP5.

• Fitment on non-HK MP5 clones is not guaranteed. While it may work on some clones, dimensional differences between manufacturers can affect compatibility.

• Sling Clip Cut Option:

  • With Sling Clip Cut – Designed for MP5 receivers equipped with a factory sling clip.

  • No Sling Clip Cut – For receivers without a sling clip.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Purpose-built for the Radian A-DAC 15 lower, this enhanced magwell is designed to increase reload speed and consistency without adding bulk or complexity. Its streamlined form expands the magwell funnel for smoother, more intuitive magazine insertion, especially under pressure. 

Key Features:

• Streamlined Profile – Low-profile, snag-free shape that stays clear of gear, gloves, and kit.

• Enhanced Funnel Geometry – Enlarges the magwell opening for faster, more forgiving reloads.

• Uninterrupted Handling – Contoured to support clean manipulations and transitions without interference.

• Minimal Hardware, Maximum Reliability – Installs with a single M2 screw and one M2 Nylock Nut (1.5 mm Allen wrench required) for a secure, no-fuss setup.

Variant Options:

Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.

Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.

Installation Notice

• Secure the screw until the clamping section begins to close, then apply a small final adjustment.

• Do not overtighten. Excess torque may deform or damage the magwell.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for speed and reliability, this magwell is purpose-engineered for the FN SCAR 17 and SCAR 20 platforms. It enhances the factory magwell geometry with a larger, more efficient funnel for faster reloads, without adding unnecessary bulk. Designed to stay out of your way during manipulations, transitions, and field use, this upgrade supports smoother reloads while keeping your kit streamlined. 

Key Features:

• Streamlined Profile: Compact, smooth-edged design that won’t snag on gear, gloves, or chest rigs.

• Enhanced Funnel Size: Widens the magwell opening to guide magazines in with ease 

• Uninterrupted Handling: Carefully contoured to maintain clean reloads and transitions without disrupting your manual of arms.

• Minimal Hardware, Maximum Reliability: Uses a single M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.

Installation Notice

• Secure the screw until the clamping section begins to close, then apply a small final adjustment.

• Do not overtighten. Excess torque may deform or damage the magwell.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Purpose-built for the Aero Precision EPC-9 platform, the Magwell – Aero Precision EPC-9 enhances reload speed and consistency without unnecessary bulk. Designed as a clean, low-profile funnel, it promotes smoother magazine insertion and more confident seating.

Key Features:

• Low-Profile, Snag-Free Shape — Streamlined exterior stays clear of gear, gloves, and kit.
• Optimized Funnel Geometry — Enlarged, forgiving entry for faster, more consistent reloads.
• Seamless Handling — Contoured to support natural transitions and clean manipulations.
• Minimal Hardware, Maximum Reliability – Uses a single M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.
  

Compatibility Disclaimer

Designed specifically for the Aero Precision EPC-9 platform.

Compatibility with other AR-9 lowers or non-Aero Precision receivers, is not guaranteed.

Installation Notice:

• Secure the screw until the clamping section begins to close, then apply a small final adjustment.

• Do not overtighten. Excess torque may deform or damage the magwell.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Purpose-built for the Quarter Circle 10 9mm lower, the Magwell – Quarter Circle 10 9mm Lower accelerates reloads and improves consistency without adding bulk or unnecessary complexity. Designed as a clean, low-profile funnel, it smooths magazine insertion for faster, more instinctive reloads. Especially when time, movement, and efficiency matter.

Key Features:

• Low-Profile, Snag-Free Shape — Slim silhouette stays clear of gear, gloves, and kit.

• Optimized Funnel Geometry — Wider, forgiving entry for faster magazine seating under stress.

• Seamless Handling — Contoured to support smooth transitions and clean manipulations.

• Simple, Reliable Installation — Secures with one screw for a no-fuss fit.

Compatibility Disclaimer

Designed specifically for Quarter Circle 10 9mm lowers.

Compatibility with other 9mm AR lowers or non–Quarter Circle 10 receivers is not guaranteed.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

The MP5 Extended Magazine Release enhances reload speed and ergonomics by adding extended activation surfaces on both the left and right sides, delivering true ambidextrous control. Designed for faster, more intuitive magazine drops, it allows shooters to maintain grip and focus while executing reloads.

An extended center paddle further improves accessibility, making magazine releases quicker and more consistent whether running drills, competition stages, or duty use.

Purpose-built for the MP5 platform, this upgrade improves usability without adding unnecessary bulk or interfering with normal weapon handling.

Key Features:

• Fully Ambidextrous Design — Extended paddles on both left and right sides for fast, intuitive magazine release from either hand.

• Extended Center Paddle — Enlarged central paddle for improved reach and quicker activation.

• Faster Reloads — Reduces hand movement and improves consistency during magazine changes.

• Low-Profile, Purposeful Geometry — Enhanced control without excess bulk or snag points.

Installation

• Slides over the factory MP5 magazine release and secures in place using an M3 set screw.

Compatibility Disclaimer

• Confirmed fit on HK MP5 variants, including the HK SP5.

• Fitment on non-HK MP5 clones is not guaranteed. While it may work on some clones, dimensional differences between manufacturers can affect compatibility.

Designed for shooters who demand faster reloads and true ambidextrous control, the MP5 Extended Magazine Release is a simple, effective upgrade to modernize the MP5 platform.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

The NVG Flip Cap is engineered to provide secure, storage-grade protection for your night vision device’s objective lens. When it’s time to go active, the flip design allows for a rapid transition from blackout to full visibility in one smooth motion.

Key Features:

• Rapid Light Access – Flip-to-fire design allows instant activation from complete blackout—perfect for sudden light transitions or mission-ready deployment.

• Storage-Grade Protection – Blocks stray light to help prevent IIT damage during storage, transport, or staged readiness.

• Non-Marring Durability – Constructed from carbon fiber-reinforced PETG for impact resistance without scratching sensitive surfaces.

• Secure Retention – Attaches via an internal collar mount further back on the housing, providing a stable, rattle-free fit.

• Tailored Fit & Finish – Custom-built for multiple configurations to match your lens setup and mission needs.

THIS IS FOR ONE FLIP CAP ONLY

Compatible With:
PVS-14, PVS-31, MOD3, DTNVS, RNVG, and other devices with similar objective profiles.

MADE IN THE USA.

BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Built for Protection. Designed for Sacrificial Lenses.

The NVG Killflash / ARD – Thread-In for Sacrificial Lens is a compact, low-profile accessory designed to protect sacrificial lens covers on night vision devices while reducing visible and IR glare. Its threaded installation screws securely into the lens, providing a sleek, stable fit across multiple NVG platforms, including PVS-14, RNVG, DTNVS, KATANA, and more.

Paired with the NVG Flip Cap, it enables complete light control, fully blocking light from entering your NVGs when not in use.

Manufactured from durable polymer, the NVG Killflash / ARD – Thread-In for Sacrificial Lens combines minimal bulk with reliable protection, shielding sacrificial lenses from impacts, debris, and environmental hazards without adding unnecessary footprint.

Key Features:

• Thread-In Installation – Screws directly into sacrificial lenses for secure, ultra-compact retention.

• Glare-Defeating ARD – Reduces visible and IR reflections to minimize signature.

• Designed for Sacrificial Lenses – Protects disposable lens covers while maintaining performance.

• Pairs with NVG Flip Cap – Fully blocks light when not in use.

• Ultra-Compact & Lightweight – Minimal bulk while enhancing overall device protection.

Notes / Disclaimer:
Threaded retention may vary slightly based on tolerances. This product is designed to reduce glare and protect sacrificial lenses, but does not guarantee the elimination of all reflections or protection from all impacts. Minor cosmetic wear may occur during normal use. It is recommended to cover your lens when not in use to protect it from light damage.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for Protection. Designed to Defeat Glare.

The NVG Killflash / ARD – Press-Fit protects the objective lens of night vision devices while reducing visible and IR glare. Its press-fit design slides securely onto the lens for a low-profile, tool-free fit across multiple NVG platforms, including PVS-14, RNVG, DTNVG, KATANA, and more.

Paired with the NVG Flip Cap, it enables complete light control, fully blocking light when NVGs are not in use.

Manufactured from durable polymer, the NVG Killflash / ARD – Press-Fit combines minimal bulk with reliable protection, shielding lenses from impacts, debris, and environmental hazards without adding unnecessary footprint.

Key Features:

• Press-Fit Installation – Slides onto the objective lens for secure, tool-free retention.

• Glare-Defeating ARD – Reduces visible and IR reflections to minimize signature.

• Low-Profile & Slim – Minimal bulk while maintaining protection.

• Pairs with NVG Flip Cap – Fully blocks light when not in use.

• Objective Lens Protection – Shields NVG glass from impacts and debris.

Notes / Disclaimer:
Press-fit retention may vary slightly based on tolerances. This product is designed to reduce glare and protect lenses, but does not guarantee elimination of all reflections or protection from all impacts. Minor cosmetic wear may occur during normal use. It is recommended to cover your lens when not in use to protect it from light damage.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for Protection. Designed to Defeat Glare.

The NVG Killflash / ARD – Thread-In protects the objective lens of night vision devices while reducing visible and IR glare. Its threaded design screws directly into the lens for a secure, low-profile fit. Compatible with PVS-14, RNVG, DTNVS, KATANA, and more. It delivers reliable protection in a slimmer, less bulky form than the press-fit option.

When paired with the NVG Flip Cap, it provides complete light control, fully blocking light when NVGs are not in use.

Manufactured from durable polymer, the NVG Killflash / ARD – Thread-In adds minimal weight while maintaining lens clarity and usability.

Key Features:

• Thread-In Installation – Screws directly into the objective lens for a secure fit.

• Glare-Defeating ARD – Reduces visible and IR reflections to help minimize signature.

• Less Bulky Profile – Slimmer than press-fit options for a low-profile footprint.

• Pairs with NVG Flip Cap – Fully blocks light when not in use.

• Objective Lens Protection – Shields NVG glass from impacts and debris.

• Lightweight & Durable – Minimal weight, maximum protection.

Notes / Disclaimer:
Threaded retention may vary slightly based on tolerances. This product reduces glare and protects the lens, but does not guarantee complete elimination of reflections or protection from all impacts. Minor cosmetic wear may occur during normal use. It is recommended to cover your lens when not in use to protect it from light damage.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY