Products

Built for speed and reliability, this magwell is purpose-engineered for Milspec Forged lowers. Its compact form increases the magwell funnel size for smoother, vacuum-like reloads while adding no unnecessary bulk or complexity. Designed to stay out of your way, it supports fast reloads and clean manipulations without interfering with your manual of arms. Crafted from a single piece of rugged nylon, this magwell delivers a rock-solid upgrade in a lightweight package.

Key Features:
Streamlined Profile – Compact, smooth-edged design that won’t catch on gear, gloves, or kit.
Enhanced Funnel Size – Expands the magwell opening for vacuum-like reloads and faster magazine insertion.
Uninterrupted Handling – Contoured to avoid interference during reloads, manipulations, and transitions.
Minimal Hardware, Maximum Reliability – Uses a single M2 screw and nut (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.

Compatibility Note:
This magwell is compatible with standard Anderson Milspec Forged lowers. It has not been tested with other Milspec lowers. If you have different lower or special requirements, we’re happy to work with you to ensure a perfect fit.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

PMAG Laser Stippling & Engraving Jig

Customize your PMAGs with precision and consistency. This dual-sided jig aligns both sides of your PMAG for clean, repeatable laser stippling or engraving in a single setup.

Engineered to hold your magazine perfectly parallel to the laser, it prevents misalignment and protects non-target areas from laser bleed with surrounding material.

Key Features:

• Dual-Side Setup – Engrave both sides at once for faster, consistent results.

• Laser Control – Extra material blocks bleed, protecting edges and base.

• Precision Alignment – Holds PMAG level with the laser for clean, accurate work.

• Durable Build – Made from high-quality PLA+ for reliable performance.

Compatibility:

• Fits PMAG bases with M6 SHCS and 25mm on-center spacing.

Note:
Always follow proper safety procedures when using laser equipment.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

The Lupus 9 Labs Killflash is a precision-engineered anti-reflection device (ARD) designed to press-fit directly into your scope’s bezel that requires no adhesives, no fasteners, and no fuss. Built to eliminate lens glare and reduce your visual signature, the Killflash provides critical concealment without compromising optical clarity downrange.

Its honeycomb mesh geometry is optimized for maximum light transmission while still breaking up telltale reflections. Once installed, it sits flush with your optic for a clean, low-profile appearance.

The killflash is also available with a compatible Scope Cap. This rugged, press-on cover shields your lens and the ARD beneath it from dirt, debris, and reflective surfaces when not in use. The flipper tab allows for quick, hinge-free deployment in the field.

Features:

• Tool-Free Press-Fit Design – Installs securely without hardware

• Signature Reduction – Disrupts glare without sacrificing visibility

• Flush, Low-Profile Fit – Minimalist integration with your optic

• Optional Scope Cap – Adds lens protection and full concealment when inactive

• Rugged and Field-Ready – Designed to perform in the harshest conditions

The Lupus 9 Labs Killflash is a precision-engineered anti-reflection device (ARD) designed to press-fit directly into your scope’s bezel that requires no adhesives, no fasteners, and no fuss. Built to eliminate lens glare and reduce your visual signature, the Killflash provides critical concealment without affecting optic clarity downrange.

Its honeycomb mesh geometry is optimized for maximum light transmission while still breaking up reflections that could give away your position. Once installed, it sits flush with the optic body, blending into your platform with a sleek, low-profile finish.

Features:

• Tool-Free Press-Fit Design – Installs securely in seconds

• Signature Reduction – Eliminates lens glare without impacting clarity

• Low-Profile Appearance – Sits flush with the scope for a streamlined look

• Durable Construction – Built for real-world use

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Description:
The Lupus 9 Labs Pro ARD + Scope Cap system is a rugged, field-ready solution for LPVO scopes—offering effective lens protection and signature reduction in one streamlined package. Built from carbon fiber reinforced PETG, this setup is engineered for durability under real-world conditions.

The Pro ARD minimizes glare from sunlight and artificial light while helping conceal your position. It installs using the included shockcord—no tools, no adhesives, just a secure, minimalist fit. The ARD sits low to the bezel and flips off easily when needed for quick lens access or cleaning.

Paired with the elastic Scope Cap, this system shields your optic from dust, debris, and reflections while maintaining a sleek, ultra-low-profile. Together, they deliver reliable lens protection and optical clarity without adding bulk.

Features:

• Designed for LPVO scopes

• Carbon Fiber Reinforced PETG – Built to endure real-world use

• Dual-System Protection – Pro ARD and Scope Cap work together for complete coverage

• Signature Reduction – Pro ARD breaks up reflections from sun and artificial light

• Quick Flip-Off ARD – Low-profile and easy to remove for cleaning or access

• Shockcord Installation – Simple, secure fit without tools or fasteners

• Minimalist Scope Cap – Protects lens and reduces reflective surfaces

• Ultra-Low Profile – Reduces interference and bulk in the field

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

The Lupus 9 Labs PVS-14 Flip Cap is engineered to provide secure, storage-grade protection for your night vision device’s objective lens. When it’s time to go active, the flip design allows for a rapid transition from blackout to full visibility in one smooth motion.

Key Features:

• Rapid Light Access – Flip-to-fire design allows instant activation from complete blackout—perfect for sudden light transitions or mission-ready deployment.

• Storage-Grade Protection – Blocks stray light to help prevent IIT damage during storage, transport, or staged readiness.

• Non-Marring Durability – Constructed from carbon fiber-reinforced PETG for impact resistance without scratching sensitive surfaces.

• Secure Retention – Attaches via an internal collar mount further back on the housing, providing a stable, rattle-free fit.

• Tailored Fit & Finish – Custom-built for multiple configurations to match your lens setup and mission needs.

THIS IS FOR ONE FLIP CAP ONLY

Compatible With:
PVS-14, PVS-31, MOD3, DTNVG, RNVG, and other devices with similar objective profiles.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Built for speed and reliability, this magwell is purpose-engineered for the FN SCAR 17 and SCAR 20 platforms. It enhances the factory magwell geometry with a larger, more efficient funnel for faster reloads, without adding unnecessary bulk. Designed to stay out of your way during manipulations, transitions, and field use, this upgrade supports smoother reloads while keeping your kit streamlined. Made from a single piece of rugged nylon, it delivers dependable performance without compromise.

Key Features:

• Streamlined Profile: Compact, smooth-edged design that won’t snag on gear, gloves, or chest rigs.

• Enhanced Funnel Size: Widens the magwell opening to guide magazines in with ease 

• Uninterrupted Handling: Carefully contoured to maintain clean reloads and transitions without disrupting your manual of arms.

• Minimal Hardware, Maximum Reliability: Uses a single M2 screw (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Our Scope Caps are rugged, ultra-low-profile lens covers designed to protect your optic and the killflash beneath it when not in use. Engineered for real-world use, they guard against dust, debris, and reflections, keeping your glass clean and your signature hidden.

With a minimalist flipper tab for fast, intuitive removal, these caps eliminate bulky hinges and moving parts. Whether flipped up to take a shot or flipped down for maximum concealment, our Scope Caps stay out of the way and out of sight.

When paired with a Lupus 9 Labs Killflash, this system becomes a complete optical signature control solution. Lightweight, streamlined, and built for purpose.

Features:

• Low-Profile Design – Sits tight to your optic with zero unnecessary bulk

• Integrated Flipper Tab – Quick, intuitive removal without moving parts

• Killflash-Ready – Built to cap over Lupus 9 Labs Killflash inserts

• Signature Reduction – No reflective surfaces; optimized for stealth

• Mission-Focused Durability – Designed for the field, not the bench

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Trijicon SRO/RMR HD Optic Maintenance Tool

Ensure safe and hassle-free maintenance of your Trijicon SRO or RMR HD optic with our precision-engineered Optic Maintenance Tool. Designed to prevent scratches or damage during battery cap removal, this tool also doubles as an adjustment aid for windage and elevation, making it an essential accessory for your optic.

Key Features:

✅ Durable Construction – Made from Carbon Fiber Reinforced Nylon using FDM 3D printing for strength and reliability.
✅ Protective Design – Prevents scratches and damage to your optic’s housing while removing the battery cap.
✅ Ergonomic Grip – Ensures a secure, slip-resistant hold for effortless maintenance.
✅ Multi-Functionality – The handle shape allows for precise windage and elevation adjustments without additional tools.

Upgrade your maintenance routine with a tool designed for precision, protection, and convenience!

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

This purpose-built tool is CNC machined for a precise fit with URX II, URX 3, URX 3.1, and 11-tooth barrel nuts commonly associated with a certain well-known manufacturer (if you know, you know). Made in the USA, it’s engineered for professional use in demanding setups.

Constructed from 7075 aerospace-grade aluminum, this wrench is designed to prevent marring OEM barrel nuts while remaining exceptionally strong and lightweight. It features an open-ended design, allowing for convenient installation and removal without disassembling your muzzle device or gas block—even if your muzzle device is pinned and welded.

Finished in H-Series Cerakote Graphite Black, it offers excellent abrasion resistance, corrosion protection, and a clean, professional look.

Key Features

• CNC-Machined Precision – Designed for an exact, secure fit with URX-style systems

• 7075 Aluminum Construction – Aerospace-grade material prevents damage to aluminum barrel nuts while maintaining strength and durability

• H-Series Graphite Black Cerakote Finish – Tough, corrosion-resistant coating for lasting use

• Open-Ended Profile – No need to remove your muzzle device or gas block for access

• System Compatibility – Fits URX II, URX 3, URX 3.1, and KAC-style 11-tooth barrel nuts

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.