Night Vision

The NVG Flip Cap is engineered to provide secure, storage-grade protection for your night vision device’s objective lens. When it’s time to go active, the flip design allows for a rapid transition from blackout to full visibility in one smooth motion.

Key Features:

• Rapid Light Access – Flip-to-fire design allows instant activation from complete blackout—perfect for sudden light transitions or mission-ready deployment.

• Storage-Grade Protection – Blocks stray light to help prevent IIT damage during storage, transport, or staged readiness.

• Non-Marring Durability – Constructed from carbon fiber-reinforced PETG for impact resistance without scratching sensitive surfaces.

• Secure Retention – Attaches via an internal collar mount further back on the housing, providing a stable, rattle-free fit.

• Tailored Fit & Finish – Custom-built for multiple configurations to match your lens setup and mission needs.

THIS IS FOR ONE FLIP CAP ONLY

Compatible With:
PVS-14, PVS-31, MOD3, DTNVS, RNVG, and other devices with similar objective profiles.

MADE IN THE USA.

BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Built for Protection. Designed for Sacrificial Lenses.

The NVG Killflash / ARD – Thread-In for Sacrificial Lens is a compact, low-profile accessory designed to protect sacrificial lens covers on night vision devices while reducing visible and IR glare. Its threaded installation screws securely into the lens, providing a sleek, stable fit across multiple NVG platforms, including PVS-14, RNVG, DTNVS, KATANA, and more.

Paired with the NVG Flip Cap, it enables complete light control, fully blocking light from entering your NVGs when not in use.

Manufactured from durable polymer, the NVG Killflash / ARD – Thread-In for Sacrificial Lens combines minimal bulk with reliable protection, shielding sacrificial lenses from impacts, debris, and environmental hazards without adding unnecessary footprint.

Key Features:

• Thread-In Installation – Screws directly into sacrificial lenses for secure, ultra-compact retention.

• Glare-Defeating ARD – Reduces visible and IR reflections to minimize signature.

• Designed for Sacrificial Lenses – Protects disposable lens covers while maintaining performance.

• Pairs with NVG Flip Cap – Fully blocks light when not in use.

• Ultra-Compact & Lightweight – Minimal bulk while enhancing overall device protection.

Notes / Disclaimer:
Threaded retention may vary slightly based on tolerances. This product is designed to reduce glare and protect sacrificial lenses, but does not guarantee the elimination of all reflections or protection from all impacts. Minor cosmetic wear may occur during normal use. It is recommended to cover your lens when not in use to protect it from light damage.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for Protection. Designed to Defeat Glare.

The NVG Killflash / ARD – Thread-In protects the objective lens of night vision devices while reducing visible and IR glare. Its threaded design screws directly into the lens for a secure, low-profile fit. Compatible with PVS-14, RNVG, DTNVS, KATANA, and more. It delivers reliable protection in a slimmer, less bulky form than the press-fit option.

When paired with the NVG Flip Cap, it provides complete light control, fully blocking light when NVGs are not in use.

Manufactured from durable polymer, the NVG Killflash / ARD – Thread-In adds minimal weight while maintaining lens clarity and usability.

Key Features:

• Thread-In Installation – Screws directly into the objective lens for a secure fit.

• Glare-Defeating ARD – Reduces visible and IR reflections to help minimize signature.

• Less Bulky Profile – Slimmer than press-fit options for a low-profile footprint.

• Pairs with NVG Flip Cap – Fully blocks light when not in use.

• Objective Lens Protection – Shields NVG glass from impacts and debris.

• Lightweight & Durable – Minimal weight, maximum protection.

Notes / Disclaimer:
Threaded retention may vary slightly based on tolerances. This product reduces glare and protects the lens, but does not guarantee complete elimination of reflections or protection from all impacts. Minor cosmetic wear may occur during normal use. It is recommended to cover your lens when not in use to protect it from light damage.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for Protection. Designed to Defeat Glare.

The NVG Killflash / ARD – Press-Fit protects the objective lens of night vision devices while reducing visible and IR glare. Its press-fit design slides securely onto the lens for a low-profile, tool-free fit across multiple NVG platforms, including PVS-14, RNVG, DTNVG, KATANA, and more.

Paired with the NVG Flip Cap, it enables complete light control, fully blocking light when NVGs are not in use.

Manufactured from durable polymer, the NVG Killflash / ARD – Press-Fit combines minimal bulk with reliable protection, shielding lenses from impacts, debris, and environmental hazards without adding unnecessary footprint.

Key Features:

• Press-Fit Installation – Slides onto the objective lens for secure, tool-free retention.

• Glare-Defeating ARD – Reduces visible and IR reflections to minimize signature.

• Low-Profile & Slim – Minimal bulk while maintaining protection.

• Pairs with NVG Flip Cap – Fully blocks light when not in use.

• Objective Lens Protection – Shields NVG glass from impacts and debris.

Notes / Disclaimer:
Press-fit retention may vary slightly based on tolerances. This product is designed to reduce glare and protect lenses, but does not guarantee elimination of all reflections or protection from all impacts. Minor cosmetic wear may occur during normal use. It is recommended to cover your lens when not in use to protect it from light damage.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for Protection. Designed for Use.

The PERST-4 Glass Cover is designed to provide an added layer of protection for the exposed laser glass on PERST-4 units. Shielding the front lens from direct impacts, debris, and environmental hazards, it helps reduce the risk of damage during handling, transport, and use.

Engineered to fit securely over the PERST-4 laser housing, the cover acts as a sacrificial barrier, absorbing minor impacts and abrasions that could otherwise compromise the laser glass. Whether used on a duty setup, training rifle, or range gun, it adds peace of mind without interfering with function or footprint.

Manufactured from durable polymer, the PERST-4 Glass Cover maintains a low-profile form while providing dependable protection in demanding environments.

Key Features

• Protective Lens Shield
  Adds a physical barrier to help protect the PERST-4 laser glass from impacts and debris.

• Low-Profile Design
  Maintains the original footprint of the laser unit without obstructing use or mounting.

• Secure Fitment
  Designed specifically for PERST-4 units to ensure consistent retention during use.

• Lightweight Construction
  Adds minimal weight while enhancing overall durability.

Notes / Disclaimer:
This product is designed to help reduce the likelihood of damage, but it does not guarantee protection from all impacts or misuse. Cosmetic wear or damage may occur during normal use.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for Control. Designed for Protection.

The PERST-4 Diffuser Cover provides both lens protection and controlled beam diffusion for PERST-4 laser units. Designed to shield the exposed laser glass while softening the output of powerful visible and IR lasers, it helps reduce laser bloom and create a more flood-like illumination pattern.

By diffusing the laser output, the PERST-4 Diffuser Cover spreads energy over a wider area, making the beam less intense and more usable at close to mid-range distances. This can improve situational awareness and reduce excessive splashback when operating in confined or reflective environments.

Manufactured from durable polymer, the PERST-4 Diffuser Cover maintains a low-profile footprint while delivering dependable protection and consistent diffusion performance in demanding conditions.

Key Features:

• Integrated Diffusion Layer
  Softens visible and IR laser output to reduce bloom and produce a wider, more flood-like pattern.

• Protective Lens Shield
  Adds a sacrificial barrier to help protect the PERST-4 laser glass from impacts and debris.

• Low-Profile Design
  Maintains the original footprint of the laser unit without interfering with mounting or operation.

• Secure Fitment
  Designed specifically for PERST-4 units to ensure consistent retention during use.

• Lightweight Construction
  Adds minimal weight while enhancing overall durability.

Notes / Disclaimer:
Laser diffusion characteristics may vary based on environment, distance, and laser settings. This product is designed to reduce bloom and protect the lens but does not eliminate all laser splash or guarantee protection from all impacts. Cosmetic wear or damage may occur during normal use.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY