Sort by:
15 products
15 products
Built for speed and reliability, this magwell is purpose-engineered for the B&T Glock lower. Designed to enhance reload performance without adding bulk, it expands the magwell opening for smoother, faster, and more consistent magazine changes even under pressure.
Key Features:
-
Streamlined Profile – Compact, smooth-edged form that won’t snag on gloves, gear, or kit.
-
Enhanced Funnel Geometry – Enlarges the magwell opening for vacuum-like reloads and faster magazine alignment.
-
Uninterrupted Handling – Contoured to stay out of your way during reloads, transitions, and manipulations.
-
Simple, Secure Mounting – Installs using an underside-mounted M3 set screw pin for a tight, reliable hold.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Purpose-built for the MP5 platform, the MP5 Magwell accelerates reloads and improves consistency without adding bulk or unnecessary complexity. Designed as a clean, low-profile funnel, it smooths magazine insertion for faster, more instinctive reloads. Especially when time, movement, and efficiency matter.
Key Features:
-
Low-Profile, Snag-Free Shape — Slim silhouette stays clear of gear, gloves, and kit.
-
Optimized Funnel Geometry — Wider, forgiving entry for faster magazine seating under stress.
-
Seamless Handling — Contoured to support smooth transitions and clean manipulations.
-
Simple, Reliable Installation — Secures with one M2 screw (requires 1.5 mm Allen) for a no-fuss fit.
Compatibility Disclaimer
-
Confirmed fit on HK MP5 variants, including the HK SP5.
-
Fitment on non-HK MP5 clones is not guaranteed. While it may work on some clones, dimensional differences between manufacturers can affect compatibility.
-
Sling Clip Cut Option:
-
With Sling Clip Cut – Designed for MP5 receivers equipped with a factory sling clip.
-
No Sling Clip Cut – For receivers without a sling clip.
-
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Built for speed and reliability, this magwell is purpose-engineered for Milspec Forged lowers. Its compact form increases the magwell funnel size for smoother, vacuum-like reloads while adding no unnecessary bulk or complexity. Designed to stay out of your way, it supports fast reloads and clean manipulations without interfering with your manual of arms.
Key Features:
-
Streamlined Profile – Compact, smooth-edged design that won’t catch on gear, gloves, or kit.
-
Enhanced Funnel Size – Expands the magwell opening for vacuum-like reloads and faster magazine insertion.
-
Uninterrupted Handling – Contoured to avoid interference during reloads, manipulations, and transitions.
-
Minimal Hardware, Maximum Reliability – Uses a single M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.
Variant Options:
Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.
Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.
Compatibility Note:
This magwell is compatible with standard Anderson Milspec Forged lowers. It has not been tested with other Milspec lowers. If you have different lower or special requirements, we’re happy to work with you to ensure a perfect fit.
Installation Notice:
-
Secure the screw until the clamping section begins to close, then apply a small final adjustment.
-
Do not overtighten. Excess torque may deform or damage the magwell.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
This magwell is purpose-engineered for the Aero Precision M4E1 lower. Its compact form increases the magwell funnel size for smoother, vacuum-like reloads while adding no unnecessary bulk or complexity. Designed to stay out of your way, it supports fast reloads and clean manipulations without interfering with your manual of arms.
Key Features:
-
Streamlined Profile – Compact, smooth-edged design that won’t catch on gear, gloves, or kit.
-
Enhanced Funnel Size – Expands the magwell opening for vacuum-like reloads and faster magazine insertion.
-
Uninterrupted Handling – Contoured to avoid interference during reloads, manipulations, and transitions.
-
Minimal Hardware, Maximum Reliability – Uses a single M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.
Installation Notice:
-
Secure the screw until the clamping section begins to close, then apply a small final adjustment.
-
Do not overtighten. Excess torque may deform or damage the magwell.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Purpose-built for GRIFFIN MK2 lowers, the GRIFFIN MK2 Magwell accelerates reloads and improves consistency without adding bulk or complexity. It's a clean, low-profile funnel that smooths magazine insertion for faster, more instinctive reloads, especially when time and movement matter. Whether at the range or in active use, the GRIFFIN MK2 Magwell keeps reloads quick, manipulations tidy, and your kit interference-free.
Key Features
-
Low-Profile, Snag-Free Shape — Slim silhouette stays clear of gear, gloves, and kit.
-
Optimized Funnel Geometry — Wider, forgiving entry for faster magazine seating under stress.
-
Seamless Handling — Contoured to support smooth transitions and clean manipulations.
-
Simple, Reliable Installation — Secures with one M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen) for a no-fuss fit.
Variant Options:
Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.
Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.
Installation Notice
-
Secure the screw until the clamping section begins to close, then apply a small final adjustment.
-
Do not overtighten. Excess torque may deform or damage the magwell.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Purpose-built for the Radian A-DAC 15 lower, this enhanced magwell is designed to increase reload speed and consistency without adding bulk or complexity. Its streamlined form expands the magwell funnel for smoother, more intuitive magazine insertion, especially under pressure.
Key Features:
-
Streamlined Profile – Low-profile, snag-free shape that stays clear of gear, gloves, and kit.
-
Enhanced Funnel Geometry – Enlarges the magwell opening for faster, more forgiving reloads.
-
Uninterrupted Handling – Contoured to support clean manipulations and transitions without interference.
-
Minimal Hardware, Maximum Reliability – Installs with a single M2 screw and one M2 Nylock Nut (1.5 mm Allen wrench required) for a secure, no-fuss setup.
Variant Options:
Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.
Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.
Installation Notice
-
Secure the screw until the clamping section begins to close, then apply a small final adjustment.
-
Do not overtighten. Excess torque may deform or damage the magwell.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Built for speed and reliability, this magwell is purpose-engineered for B&T factory magazine receivers, including the APC9, GHM9, and SPC9 platforms. Its compact form increases the magwell funnel size for smoother, vacuum-like reloads while adding no unnecessary bulk or complexity. Designed to stay out of your way, it supports fast reloads and clean manipulations without interfering with your manual of arms.
Key Features:
-
Streamlined Profile: Compact, smooth-edged design that won’t catch on gear, gloves, or kit.
-
Enhanced Funnel Size: Expands the magwell opening for vacuum-like reloads and faster magazine insertion.
-
Uninterrupted Handling: Contoured to avoid interference during reloads, manipulations, and transitions.
-
Simple, Secure Mounting: Secures in place using an underside-mounted M3 set screw pin for a tight, reliable hold.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Purpose-built for the Aero Precision M5 (.308) lower, this enhanced magwell is designed to increase reload speed and consistency without adding bulk or complexity. Its streamlined form expands the magwell funnel for smoother, more intuitive magazine insertion, especially under pressure.
Key Features:
-
Streamlined Profile – Low-profile, snag-free shape that stays clear of gear, gloves, and kit.
-
Enhanced Funnel Geometry – Enlarges the magwell opening for faster, more forgiving reloads.
-
Uninterrupted Handling – Contoured to support clean manipulations and transitions without interference.
-
Minimal Hardware, Maximum Reliability – Installs with a single M2 screw and one M2 Nylock Nut (1.5 mm Allen wrench required) for a secure, no-fuss setup.
Variant Options:
Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.
Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.
Installation Notice
-
Secure the screw until the clamping section begins to close, then apply a small final adjustment.
-
Do not overtighten. Excess torque may deform or damage the magwell.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Purpose-built for the ADM UIC lower, this enhanced magwell is designed to increase reload speed and consistency without adding bulk or complexity. Its streamlined form expands the magwell funnel for smoother, more intuitive magazine insertion, especially under pressure.
Key Features:
-
Streamlined Profile – Low-profile, snag-free shape that stays clear of gear, gloves, and kit.
-
Enhanced Funnel Geometry – Enlarges the magwell opening for faster, more forgiving reloads.
-
Uninterrupted Handling – Contoured to support clean manipulations and transitions without interference.
-
Minimal Hardware, Maximum Reliability – Installs with a single M2 screw and one M2 Nylock Nut (1.5 mm Allen wrench required) for a secure, no-fuss setup.
Variant Options:
Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.
Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.
Installation Notice
-
Secure the screw until the clamping section begins to close, then apply a small final adjustment.
-
Do not overtighten. Excess torque may deform or damage the magwell.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Purpose-built for the Aero Precision EPC-9 platform, the Magwell – Aero Precision EPC-9 enhances reload speed and consistency without unnecessary bulk. Designed as a clean, low-profile funnel, it promotes smoother magazine insertion and more confident seating.
Key Features:
- Low-Profile, Snag-Free Shape — Streamlined exterior stays clear of gear, gloves, and kit.
- Optimized Funnel Geometry — Enlarged, forgiving entry for faster, more consistent reloads.
- Seamless Handling — Contoured to support natural transitions and clean manipulations.
-
Minimal Hardware, Maximum Reliability – Uses a single M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.
Compatibility Disclaimer
Designed specifically for the Aero Precision EPC-9 platform.
Compatibility with other AR-9 lowers or non-Aero Precision receivers, is not guaranteed.
Installation Notice:
-
Secure the screw until the clamping section begins to close, then apply a small final adjustment.
-
Do not overtighten. Excess torque may deform or damage the magwell.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Purpose-built for the Quarter Circle 10 9mm lower, the Magwell – Quarter Circle 10 9mm Lower accelerates reloads and improves consistency without adding bulk or unnecessary complexity. Designed as a clean, low-profile funnel, it smooths magazine insertion for faster, more instinctive reloads. Especially when time, movement, and efficiency matter.
Key Features:
-
Low-Profile, Snag-Free Shape — Slim silhouette stays clear of gear, gloves, and kit.
-
Optimized Funnel Geometry — Wider, forgiving entry for faster magazine seating under stress.
-
Seamless Handling — Contoured to support smooth transitions and clean manipulations.
-
Simple, Reliable Installation — Secures with one screw for a no-fuss fit.
Compatibility Disclaimer
Designed specifically for Quarter Circle 10 9mm lowers.
Compatibility with other 9mm AR lowers or non–Quarter Circle 10 receivers is not guaranteed.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
The CZ Grips – Flat / Palmswell are purpose-built for CZ Shadow 2 and CZ 75 models, delivering enhanced control, grip security, and ergonomics for shooters who demand consistency and confidence. Designed for both competition and defensive use, these grips provide a locked-in feel without compromise.
Available in Flat and Palmswell profiles, along with an optional magwell-compatible configuration, allowing you to tailor your setup for speed, comfort, or maximum reload efficiency.
Magwell Option
-
Magwell-Compatible – Shortened grip profile designed to accommodate a magwell (magwell will be included).
-
Standard (No Magwell) – Full-length grip profile for standard use; cannot fit a magwell. (Magwell will not be included)
Key Features:
-
Compatible with CZ Shadow 2 & CZ 75 Models – Precision fit for proven CZ platforms.
-
Aggressive Non-Slip Texture – Maintains positive grip control under recoil, sweat, or gloves.
-
Flat or Palmswell Profiles – Choose between a slimmer grip or an ergonomic, hand-filling contour.
-
Magwell-Compatible Option Available – Designed to work seamlessly with magwells for faster, easier reloads.
-
Competition & Defense Ready – Optimized for speed, control, and reliability.
Flat vs Palmswell Options
-
Flat Grip – Thinner profile reduces grip circumference for a more direct, minimalist feel.
-
Palmswell Grip – Ergonomic contour fills the natural void in the hand, improving recoil management and comfort.
Magwell Option
-
Magwell-Compatible – Allows clean integration with a magwell, improving reload speed and consistency without interference.
Whether you’re chasing faster stage times or building a reliable defensive setup, the CZ Grips – Flat / Palmswell offer modular control tailored to your shooting style.
Disclaimer
-
CZ Shadow 2 variant does not include grip screws. Existing screws are required for installation.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Purpose-built for the LMT MARS-L lower, this enhanced magwell is designed to increase reload speed and consistency without adding bulk or complexity. Its streamlined form expands the magwell funnel for smoother, more intuitive magazine insertion, especially under pressure. Whether you're on the range or in the field, this magwell keeps your reloads fast, your manipulations clean, and your gear unobstructed.
Key Features:
-
Streamlined Profile – Low-profile, snag-free shape that stays clear of gear, gloves, and kit.
-
Enhanced Funnel Geometry – Enlarges the magwell opening for faster, more forgiving reloads.
-
Uninterrupted Handling – Contoured to support clean manipulations and transitions without interference.
-
Minimal Hardware, Maximum Reliability – Installs with a single M2 screw and one M2 Nylock Nut (1.5 mm Allen wrench required) for a secure, no-fuss setup.
Variant Options:
Standard: Full-profile funnel designed for maximum guidance and forgiveness during reloads. Offers a more pronounced flare for confident magazine seating under speed.
Slim: Reduced-profile design for a lighter, cleaner footprint. Maintains improved guidance while minimizing bulk.
Installation Notice
-
Secure the screw until the clamping section begins to close, then apply a small final adjustment.
-
Do not overtighten. Excess torque may deform or damage the magwell.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Built for speed and reliability, this magwell is purpose-engineered for the FN SCAR 17 and SCAR 20 platforms. It enhances the factory magwell geometry with a larger, more efficient funnel for faster reloads, without adding unnecessary bulk. Designed to stay out of your way during manipulations, transitions, and field use, this upgrade supports smoother reloads while keeping your kit streamlined.
Key Features:
-
Streamlined Profile: Compact, smooth-edged design that won’t snag on gear, gloves, or chest rigs.
-
Enhanced Funnel Size: Widens the magwell opening to guide magazines in with ease
-
Uninterrupted Handling: Carefully contoured to maintain clean reloads and transitions without disrupting your manual of arms.
-
Minimal Hardware, Maximum Reliability: Uses a single M2 screw and one M2 Nylock Nut (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.
Installation Notice
-
Secure the screw until the clamping section begins to close, then apply a small final adjustment.
-
Do not overtighten. Excess torque may deform or damage the magwell.
MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY
Upgrade Your CZ with Our Enhanced Magwell and Grip Panels
Enhance your CZ with our carbon fiber reinforced PETG Magwell and Grip Panels, designed for durability and improved performance. The Magwell provides a larger opening for smoother, faster reloads while the included grip panels offer customizable comfort to improve grip control and overall shooting experience.
Key Features:
- Compatibility: Designed for Shadow 2, Shadow 1, SP-01, and CZ75 LS-P.
- Enhanced Magwell: Improves reload efficiency with a larger opening for smoother mag insertion.
- Customizable Grip Panels: Includes two panels that can be tailored to your comfort and performance needs.
- Secure Fit: Magwell and grip panels are held firmly in place by the included set screws.
MADE IN THE USA.
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.