Products

Upgrade your 60-Gallon Blast Cabinet with Heavy-Duty Caster Wheels

Transform your Harbor Freight, Vevor, JEGS, or Generic 60-Gallon Blast Cabinet into a mobile unit with our durable 3D-printed caster wheels. Constructed from high-strength PETG filament, these wheels feature an overbuilt, reinforced design to ensure maximum durability and eliminate the risk of failure—preventing costly shop mishaps.

Installation is effortless—no additional hardware needed. Simply remove the existing rubber feet and attach these 2-inch caster wheels to improve mobility and workspace flexibility. The design also functions as a shelf, allowing you to place a plywood insert between the wheels for added storage.

Key Features:

✔ Universal Compatibility – Fits Harbor Freight, Vevor, JEGS, and Generic 60-Gallon Blast Cabinets.
✔ Heavy-Duty Construction – 3D printed with PETG filament for superior strength and durability.
✔ Overbuilt for Safety – Extra-thick design prevents failure, ensuring long-term reliability.
✔ Effortless Installation – No additional hardware required—just swap out the rubber feet.
✔ Improved Mobility – 2-inch caster wheels make moving and repositioning easy.
✔ Optimized Height – Raises cabinet by 3.76 inches for better ergonomics and storage options.
✔ Integrated Shelf Design – Allows a plywood insert for extra storage space.
✔ High Load Capacity – Supports up to 340 lbs combined weight.
✔ Saves Time & Effort – A simple, effective solution compared to building a roll-away stand.

Upgrade your blast cabinet today for greater mobility, storage, and efficiency in your shop!

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Built for speed and reliability, this magwell is purpose-engineered for the Aero Precision M4E1 lower. Its compact form increases the magwell funnel size for smoother, vacuum-like reloads while adding no unnecessary bulk or complexity. Designed to stay out of your way, it supports fast reloads and clean manipulations without interfering with your manual of arms. Crafted from a single piece of rugged nylon, this magwell delivers a rock-solid upgrade in a lightweight package.

Key Features:
Streamlined Profile – Compact, smooth-edged design that won’t catch on gear, gloves, or kit.
Enhanced Funnel Size – Expands the magwell opening for vacuum-like reloads and faster magazine insertion.
Uninterrupted Handling – Contoured to avoid interference during reloads, manipulations, and transitions.
Minimal Hardware, Maximum Reliability – Uses a single M2 screw (requires 1.5 mm Allen wrench) for a clean install with virtually no failure risks.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Enhanced Magwell for Aero Precision M5 (.308) Lowers
Built for Precision. Engineered for Speed.

Purpose-built for the Aero Precision M5 (.308) lower, this enhanced magwell is designed to increase reload speed and consistency without adding bulk or complexity. Its streamlined form expands the magwell funnel for smoother, more intuitive magazine insertion—especially under pressure. Whether you're on the range or in the field, this magwell keeps your reloads fast, your manipulations clean, and your gear unobstructed.

Crafted from a single piece of rugged nylon polymer, it delivers lightweight durability and a rock-solid fit.

Key Features:

• Streamlined Profile – Low-profile, snag-free shape that stays clear of gear, gloves, and kit.

• Enhanced Funnel Geometry – Enlarges the magwell opening for faster, more forgiving reloads.

• Uninterrupted Handling – Contoured to support clean manipulations and transitions without interference.

• Minimal Hardware, Maximum Reliability – Installs with a single M2 screw (1.5 mm Allen wrench required) for a secure, no-fuss setup.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Proudly designed and manufactured in California, USA, AirTag Holder is built for strength, security, and seamless integration with any 1913 Picatinny rail. Constructed from carbon fiber-reinforced PETG (PETG-CF), this holder ensures your Apple AirTag stays fully enclosed and protected, giving you reliable tracking capabilities for your valuable gear.

Key Features:

• Made in the USA – Precision-crafted in California for assured quality and durability.
• Fully Enclosed Protection – Keeps your AirTag secure while safeguarding it from impact and debris.
• Carbon Fiber-Reinforced PETG – Lightweight yet rugged for long-lasting performance.
• Picatinny Rail Compatibility – Mounts securely to any available 1913 rail where space permits.
• Versatile Application – Ideal for travel, hunting, and gear security.

Specifications:

• Length: 45.68mm (1.8")
• Width: 36.30mm (1.43")
• Height: 18.15mm (0.71")
• Weight: 0.76 oz

Important Notes:

• Apple AirTag is not included.
• Disclaimer: "AirTag" is a registered trademark of Apple Inc. This product is not affiliated with or endorsed by Apple Inc.

This Picatinny-mounted AirTag holder is the perfect solution for tracking and securing your equipment with confidence. 

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Upgrade your AK’s safety operation with our AK Safety Nub, designed for quicker, easier manipulation. The precision-engineered extension provides a larger, more accessible contact point for faster engagement and disengagement.

Key Features:

• Enhanced Control – Extends the safety lever for faster, more intuitive operation.

• Secure Fitment – Simple one-time modification with included drilling jig for precise hole placement.

• Durable Construction – Made from Carbon Fiber Reinforced PETG for strength and lightweight performance.

• Optimized Speed – Reduces effort for faster safety engagement in dynamic situations.

• Low-Profile Design – Integrates seamlessly with your AK’s safety.

Experience faster, more reliable safety operation with our AK Safety Nub.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Thumb Ramp Extensions for Safariland Holsters

Custom Fit. Faster Draw. Minimal Bulk.

Designed to enhance draw speed and improve indexing, these thumb ramp extensions are optimized for Safariland ALS and ALS/SLS holsters, including Staccato/Prodigy 2011 models. Available in Rounded or Angled profiles, and compatible with both Level 1 and Level 3 holsters.

Variations:

• Rounded – Raises contact point by 8mm

• Angled – Raises contact point by 6mm
  Note: Level 3 version is shortened by 2mm and angled to accommodate SLS hood.

Options:

• Carry Side: Left or Right

• Profile: Rounded or Angled

• Holster Type:

  • Level 1 – ALS (6000/7000 Series)

  • Level 3 – ALS/SLS (6000/7000 Series)

  • Level 1 – 2011 (Staccato/Prodigy)

  • Level 3 – 2011 (Staccato/Prodigy)

Features:

• Carbon Fiber Reinforced PETG – Strong, lightweight, and impact-resistant

• Improved Ergonomics – Faster indexing and cleaner draw stroke

• Custom Fit – Designed for a secure, low-profile integration

• Left & Right-Handed Support – Built for your carry setup

Installation:
Attach with super glue to your Safariland holster for a secure and permanent fit.

Description:

Customize the front face of your AR-15 magwell with precision using our dedicated laser-engraving jig. Designed specifically for front magwell work, this jig securely holds your lower receiver in place, allowing for accurate and consistent laser engraving of logos, text, and fine details.

A built-in alignment rod keeps your lower receiver perfectly level, ensuring sharp and professional results with every pass. The secure-fit design minimizes movement during the engraving process, giving you the confidence to engrave with precision.

Whether you're working on a single rifle or multiple receivers, this jig is the reliable tool your laser setup needs for clean, detailed magwell engravings.

Key Features:

• Designed specifically for engraving the front face of AR-15 magwells

• Securely holds your lower receiver for consistent, accurate results

• Built-in alignment rod maintains proper leveling throughout the process

• Ideal for logos, text, and fine detail work

Compatibility:

• Compatible with standard AR-15 lower receivers

Note:
Lower receiver shown in the images is for illustrative purposes only and is not included with the purchase of the jig.
Always follow proper safety protocols during laser engraving.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Description:

Customize your AR-15 receivers with precision using our universal laser engraving jig. This fixture is specifically engineered to securely hold and align both upper and lower AR-15 receivers, allowing for accurate and consistent laser engraving across multiple surfaces. Whether you're engraving the left side, right side, or front of the magwell, this jig ensures clean results every time.

A built-in alignment rod maintains perfect leveling between upper and lower receivers, eliminating guesswork and reducing setup time. The jig keeps your components steady throughout the engraving process, minimizing movement and helping you achieve professional-grade results in your own workshop.

Key Features:

• Securely holds and aligns both upper and lower AR-15 receivers for precise laser engraving

• Provides access to left side, right side, and front of the magwell

• Built-in alignment rod ensures perfect leveling for clean, consistent results

• Ideal for both individual projects and batch jobs

Compatibility:

• Compatible with standard AR-15 upper and lower receivers

Note:
Receivers shown in the images are for illustrative purposes only and are not included with the purchase of the jig.
Always follow proper safety procedures when operating a laser engraver.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Enhanced Magwell for B&T Glock Lower

Built for speed and reliability, this magwell is purpose-engineered for the B&T Glock lower. Designed to enhance reload performance without adding bulk, it expands the magwell opening for smoother, faster, and more consistent magazine changes even under pressure.

Its compact, low-profile design stays clear of your gear and grip, ensuring fluid manipulations and clean transitions. Made from a single piece of rugged nylon polymer, it delivers a lightweight, field-ready upgrade built to endure.

Key Features:

• Streamlined Profile – Compact, smooth-edged form that won’t snag on gloves, gear, or kit.

• Enhanced Funnel Geometry – Enlarges the magwell opening for vacuum-like reloads and faster magazine alignment.

• Uninterrupted Handling – Contoured to stay out of your way during reloads, transitions, and manipulations.

• Simple, Secure Mounting – Installs using an underside-mounted M3 set screw pin for a tight, reliable hold.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Built for speed and reliability, this magwell is purpose-engineered for B&T factory magazine receivers, including the APC9, GHM9, and SPC9 platforms. Its compact form increases the magwell funnel size for smoother, vacuum-like reloads while adding no unnecessary bulk or complexity. Designed to stay out of your way, it supports fast reloads and clean manipulations without interfering with your manual of arms. Crafted from a single piece of rugged nylon, this magwell delivers a rock-solid upgrade in a lightweight package.

Key Features:

• Streamlined Profile: Compact, smooth-edged design that won’t catch on gear, gloves, or kit.

• Enhanced Funnel Size: Expands the magwell opening for vacuum-like reloads and faster magazine insertion.

• Uninterrupted Handling: Contoured to avoid interference during reloads, manipulations, and transitions.

• Simple, Secure Mounting: Secures in place using an underside-mounted M3 set screw pin for a tight, reliable hold.

MADE IN THE USA
BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY

Mag Bumper Pads for B&T APC9 / GHM9 / SPC9 – Fits All Gen. B&T and KCI Mags

Boost durability and handling with our Short Mag Bumper Pads, purpose-built for B&T APC9, GHM9, SPC9, and compatible with all generations of B&T and KCI magazines. Designed for secure, no-wobble retention, these pads lock in using the front and rear mag cutouts, holding firm even under heavy use.

Each bumper pad is molded from resilient rubber to absorb shock, protect your mag base, and improve reload handling. The added surface area provides a positive grip when drawing mags from tight pouches, while their low-profile design keeps bulk to a minimum.

Key Features

• Secure Fitment – Locks into the magazine’s front and back notches for a tight, reliable hold

• Impact-Resistant Rubber – Absorbs shock while protecting your magazine base from drops or strikes

• Stays Put Under Stress – Remains firmly attached until the user pulls the release tabs

• Improved Grip Surface – Enhances mag control for quicker, more consistent reloads

Compatibility

• All generations of B&T APC9, GHM9, SPC9 magazines

• Compatible with KCI APC-style mags

Optimize your loadout with a durable, low-profile upgrade that adds both protection and control to your APC mags.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Purpose-built for B&T APC platforms, this tool is designed to precisely interface with barrel nut BT-36111, serving as a direct replacement for OEM BT-36175.

The tool head is CNC-machined from billet tool steel and features internal engagement teeth fully enclosed by steel, offering increased rigidity and reduced risk of deflection or failure under torque.

Constructed from three welded components, a machined head, steel shaft, and ½" square drive adapter, this wrench is designed for strength, repeatable performance, and compatibility with standard torque tools.

Finished in E-Series Cerakote Titanium for durability and corrosion resistance.

Features:

• Billet CNC Steel Head – Stronger and more precise than OEM

• Enclosed Internal Teeth – Increased structural integrity under load

• Direct OEM Replacement – Interfaces with BT-36111 barrel nut

• ½" Square Drive – Compatible with torque and breaker bars

• Cerakote E-Series Finish – Durable, non-reflective, and corrosion-resistant

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Vortex AMG UH-1 Gen II/2 Dust Covers – Durable Protection for Your Optic

Protect your Vortex AMG UH-1 Gen II/2 optic from dust, dirt, and debris with our custom-designed dust covers. Crafted from durable plastic, these covers fit securely into your optic's housing, safeguarding the optic's glass during storage and keeping your gear in top condition. Ideal for storage and travel, these covers ensure your optic is always ready for action.

Key Features:

• Custom Fit – Designed specifically for Vortex AMG UH-1 Gen II/2 optics for a perfect fit.
• Durable Construction – Made from durable plastic for long-lasting protection against dust and debris.
• Easy Installation – Press-fit design makes installation a breeze, ensuring a secure hold inside the optic's housing.
• Reliable Protection – Keeps the optic's glass clean and free from dust, dirt, and other contaminants during storage.

Note:

• First installations and removals may be a bit tight as the plastic conforms to the optic’s housing.
• The PLA material is non-marring, ensuring no damage to the optic during use.

Keep your Vortex AMG UH-1 Gen II/2 optic in prime condition with these essential dust covers. Perfect for when you're not using your gear but want to keep it protected and pristine.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

The Fortis Night Rail Barrel Nut Wrench is purpose-built for seamless installation and removal of the Fortis Night Rail Barrel Nut. Machined from durable 7075 aluminum, it offers the perfect balance of strength and lightweight performance. Designed to match the unique profile of the Night Rail system, this wrench ensures a secure fit and helps prevent damage during installation or maintenance. Whether you're outfitting a new build or upgrading an existing setup, this is the right tool for the job.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Take your custom Glock builds to the next level with our Backstrap Jig, purpose-built for laser engraving and stippling work on Glock frame front and back straps. Designed to deliver rock-solid stability, this jig locks your frame into the ideal position for detailed work. 

Features

• Precision Fit – Machined to cradle Glock frames securely, minimizing movement during laser passes or manual work.

• Optimized Positioning – Ensures a perfect fit for both front and back straps.

• Tool-Free Setup – Drop-in design with intuitive locking features for quick, repeatable installs.

• Compatible Models – Fits Glock Gen 3–5 full-size and compact frames (17, 19, 22, 23, etc.).

Why It Matters
Whether you're a shop owner running a fiber laser or a DIYer, clean results start with a stable foundation. This jig saves time, reduces errors, and elevates the quality of your custom framework.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Achieve professional-grade customization for your Glock with our laser stippling and engraving side panels jig. This jig is specifically designed to securely hold your Glock parallel to the laser, ensuring precise and consistent results when stippling or engraving. 

• Side Stippling and Engraving Side Panels Jig: Ideal for adding enhanced texture and personalized designs to the side panels of your Glock grip.

Crafted from PLA+ filament, these jigs are built for durability and accuracy, offering stable performance for laser stippling and engraving directly in your own workshop.

Key Features:

• Precise and Secure – Holds your Glock parallel to the laser for accurate and consistent results.

• Durable Construction – Made from PLA+ filament for reliable stability during the stippling and engraving process.

Compatibility:

• Compatible with all Glock models, securely holding the Glock from the trigger pin for stable, precise work.

Note:

• The Glock pistol shown in the image is for illustrative purposes only and is not included with the purchase of the jig.

• Please ensure proper safety measures are followed during the laser stippling and engraving process.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.

Mag Bumper Pads for HK MP5 – Rubber Base Pads for Secure Fit and Improved Handling

Enhance control and protection for your HK MP5 magazines with these Short Mag Bumper Pads. Designed for a locked-in fit using the front and rear mag cutouts, these rubber bumpers stay firmly in place under heavy use—only coming off when intentionally removed via the side tabs.

Built to withstand impacts and reduce wear during training or duty use, these bumpers also offer better handling during reloads. The added grip helps when pulling mags from tight pouches, making reloads faster and more consistent.

Key Features

• Secure Fitment – Locks into the magazine’s front and back notches for a stable, non-slip hold

• Durable Rubber Construction – Resists impact while protecting the mag base from drops or surface contact

• Retention Under Stress – Remains attached until the tabs are deliberately pulled

• Improved Grip Surface – Enhances reload speed and control in dynamic environments

Compatibility

• Compatible with HK MP5 magazines

A simple but effective upgrade that improves both durability and reload consistency for your MP5 loadout.

MADE IN THE USA. BACKED BY THE LUPUS 9 LABS LIMITED LIFETIME WARRANTY.